150-B-06224E This kit includes all of the needed gaskets and O-rings to bring your jet drive back from the dead. This kit includes: - 1 12J Bowl Gasket #S-09017
- 1 Nozzle Gasket #S10870
- 1 Bearing Cap Gasket #S-09018
- 4 Packing Ring Each #S-08287
- 1 Nozzle O-Ring #S17737
- 1 Hand Hole Cover O-Ring #S13734
|
|
150-B-06224 This kit includes all of the needed gaskets and O-rings to bring your jet drive back from the dead. This kit includes: - 1 Suction Gasket #L-02850
- 1 12J Bowl Gasket #S-09017
- 1 Nozzle Gasket #S10870
- 1 Bearing Cap Gasket #S-09018
- 4 Packing Ring Each #S-08287
- 1 T/A Gasket #S13166
- 1 Bowl O-Ring #S13731
- 1 Nozzle O-Ring #S17737
- 1 Hand Hole Cover O-Ring#S13734
- 1 Steering Tube Bushing #S13531
- 1 Cable Grommet #S-09488
|
|
150-B06229 12JG Gasket Kit
Kit Includes:
- 150L-02850 (1) Suction Gasket
- 150S-09017 (1) 12J Bowl Gasket
- 150S-09018 (1) Bearing Cap Gasket
- 150-S10870 (1) Nozzle Gasket
|
|
150-B06231 All Berkeley pumps seals only kit
Kit Includes:
- 150S-14476 (1) Bowl Seal
- 150S-14475 (1) Bearing Cap Seal
- 150S-14380 (1) Suction Piece Seal
|
|
150-100 This Kit Includes:
1-150-L02507, Aluminum Impeller, size A only.
1-150-S10126, Stainless shouldered wear ring.
1-150-S10068, Wear ring insulator.
1-152-K4007, Impeller shim kit.
|
|
150-B-06223 If your impeller wear ring surface is still at the factory 7.225 dimension but the wear ring is worn then this is the kit for you! It includes a new standard 7.250 ID wear ring and the insulator that holds the wear ring into the suction housing. This kit includes: - 1 Standard Wear Ring #S-10125
- 1 Insulator #S-10068
|
|
150-B-06220 These seals keep the grease and oil in and the water out! It includes the seals on each side of the thrust bearing as well as the bowl, oil seal and the 4 packing rings. This kit includes: - 1 BEARING CAP SEAL #1-S14475
- 1 BOWL SEAL #1-S14476
- 1 SUCTION PIECE SEAL #1-S14380
- 4 PACKING RING #4-S08287
|
|
150-B06217U This add-on item for Berkeley Rebuild Kits 150-B06217 and 150-B06218 will replace the standard Berkeley wear ring with a Stainless Steel shouldered wear ring and shim kit.
NOTE: This add-on item must be purchased with a Master "A" or Partial "B" Berkeley Rebuild Kit.
|
|
150-5020 For use with plumbing outlet 150-5000 Water Pressure Relief Kit to dump overboard. Includes: - One Black Anodized 1/2" NPT to -8 AN Adapter
- One Straight and one 90 Degree Black Anodized -8 AN Hose Fittings
- Polished Billet Aluminum -8 AN Water Dump
- Three feet of -8 AN Premium Water Hose
|
|
This Part has options, please click the button below to order.
150-B-06217 + Option(s) Berkeley "A" Master Overhaul Kit
To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three "Repair / Parts" Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF. There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!
"A" Master Overhaul Kit includes:
- 1 L02507 Impeller "A"
- 1 L02850 Intake Gasket
- 1 S14063 Thrust Bearing
- 1 S14482 Impeller Key
- 1 S14475 Bearing Cap Seal
- 1 S14380 Suction Piece Seal
- 1 S14476 Bowl Seat
- 1 S14478 Retaining Ring
- 1 S09017 Bowl Gasket
- 1 S10870 Nozzle Hsg. Gasket
- 1 S09018 Bearing Cap Gasket
- 1 S10068 Insulator
- 1 S10125 Wear Ring
|
- 2 S14483 Bowl Bearings
- 1 S13531 Steering Tube Bushing
- 1 S09488 Grommet
- 4 S08287 Packing Rings
- 4 S14477 Nyliner Bearing
- 2 S15414 Nyliner Bearing
- 1 S13166 Transom Gasket
- 1 S13731 Bowl O-Ring
- 1 S17737 Nozzle O-Ring
- 1 S13734 Hand Hole Cover O-Ring
- 1 S12005 Impeller Nut
- 1 S09850 Bowl Bearing Cap
|
|
|
This Part has options, please click the button below to order.
150-2015 + Option(s) Berkeley "A" Master Overhaul Kit with Factory Stock Shaft and Pressed on Bearing
To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three "Repair / Parts" Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF. NOW - Also the bearing is pressed on the shaft from the factory to save you the hassle. This kit is a easy way to service and upgrade your pump at the same time!
There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!
"A" Master Overhaul Kit with Factory Stock Shaft and Pressed on Bearing includes:
- 1 L02507 Impeller "A"
- 1 L02850 Intake Gasket
- 1 S14063 Thrust Bearing
- 1 S14482 Impeller Key
- 1 S14475 Bearing Cap Seal
- 1 S14380 Suction Piece Seal
- 1 S14476 Bowl Seat
- 1 S14478 Retaining Ring
- 1 S09017 Bowl Gasket
- 1 S10870 Nozzle Hsg. Gasket
- 1 S09018 Bearing Cap Gasket
- 1 S10068 Insulator
- 1 S10125 Wear Ring
- 1 150-M05356 Factory Stock Inducer Shaft
|
- 2 S14483 Bowl Bearings
- 1 S13531 Steering Tube Bushing
- 1 S09488 Grommet
- 4 S08287 Packing Rings
- 4 S14477 Nyliner Bearing
- 2 S15414 Nyliner Bearing
- 1 S13166 Transom Gasket
- 1 S13731 Bowl O-Ring
- 1 S17737 Nozzle O-Ring
- 1 S13734 Hand Hole Cover O-Ring
- 1 S12005 Impeller Nut
- 1 S09850 Bowl Bearing Cap
- 1 S14379 Shaft Sleeve
|
|
|
This Part has options, please click the button below to order.
150-2020 + Option(s) Berkeley "A" Master Overhaul Kit with Inducer, Shaft and Pressed on Bearing
To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three "Repair / Parts" Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF. NOW - This new kit includes an Inducer Cavitation Reducer and specially machined shaft to accept it. Also the bearing is pressed on the shaft from the factory to save you the hassle. This kit is a easy way to service and upgrade your pump at the same time!
There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!
"A" Master Overhaul Kit with Inducer, Shaft and Pressed on Bearing includes:
- 1 L02507 Impeller "A"
- 1 L02850 Intake Gasket
- 1 S14063 Thrust Bearing
- 1 S14482 Impeller Key
- 1 S14475 Bearing Cap Seal
- 1 S14380 Suction Piece Seal
- 1 S14476 Bowl Seat
- 1 S14478 Retaining Ring
- 1 S09017 Bowl Gasket
- 1 S10870 Nozzle Hsg. Gasket
- 1 S09018 Bearing Cap Gasket
- 1 S10068 Insulator
- 1 S10125 Wear Ring
- 1 M05356M 17-4 Machined Inducer Shaft
|
- 2 S14483 Bowl Bearings
- 1 S13531 Steering Tube Bushing
- 1 S09488 Grommet
- 4 S08287 Packing Rings
- 4 S14477 Nyliner Bearing
- 2 S15414 Nyliner Bearing
- 1 S13166 Transom Gasket
- 1 S13731 Bowl O-Ring
- 1 S17737 Nozzle O-Ring
- 1 S13734 Hand Hole Cover O-Ring
- 1 S12005 Impeller Nut
- 1 S09850 Bowl Bearing Cap
- 1 S14379 Shaft Sleeve
- 1 151-1025 Inducer
|
|
|
150-5010 For use with plumbing outlet 150-5000 Water Pressure Relief Kit to dump overboard. Includes:
- Brass 1/2" NPT x 5/8" Hose Fitting
- Plastic 5/8" Hose Water Dump
- Two Stainless Steel Hose Clamps
- Three feet of 5/8" Water Hose
|
|

150-B-06218 Berkeley "B" Partial Overhaul Kit
To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three `Repair / Parts' Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!
Special Limited Time Offer No Part Substitutions
"B" Partial Overhaul Kit includes:
- 1 L02850 Intake Gasket
- 1 S14063 Thrust Bearing
- 1 S14482 Impeller Key
- 1 S14475 Bearing Cap Seal
- 1 S14380 Suction Piece Seal
- 1 S14476 Bowl Seat
- 1 S14478 Retaining Ring
- 1 S09017 Bowl Gasket
- 1 S10870 Nozzle Hsg. Gasket
- 1 S09018 Bearing Cap Gasket
- 1 S10068 Insulator
- 1 S10125 Wear Ring
|
- 2 S14483 Bowl Bearings
- 1 S13531 Steering Tube Bushing
- 1 S09488 Grommet
- 4 S08287 Packing Rings
- 4 S14477 Nyliner Bearing
- 2 S15414 Nyliner Bearing
- 1 S13166 Transom Gasket
- 1 S13731 Bowl O-Ring
- 1 S17737 Nozzle O-Ring
- 1 S13734 Hand Hole Cover O-Ring
- 1 S12005 Impeller Nut
- 1 S09850 Bowl Bearing Cap
|
|
|
150-B-06219 Berkeley "C" Seals & Gaskets Kit
To facilitate easier maintenance of your Berkeley
pump, Berkeley Jet Drive has created three `Repair / Parts'
Kits Each kit is applicable to all Berkeley Jet Drive Models:
12JB, 12JC, 12JG, 12JE, and 12JF. There are many people attempting
to sell non-original replacement kits in an attempt to
compete price wise They short sell or remove parts to try and
compete with factory pricing Don't be mislead, get all that
you pay for, demand authentic Berkeley parts!
"C" Seals & Gaskets Kit Only includes:
- 1 L02850 Intake Gasket
- 1 S14475 Bearing Cap Seal
- 1 S14380 Suction Piece Seal
- 1 S14476 Bowl Seat
- 1 S09017 Bowl Gasket
- 1 S10870 Nozzle Hsg. Gasket
- 1 S09018 Bearing Cap Gasket
- 4 S08287 Packing Rings
- 1 S13166 Transom Gasket
- 1 S13731 Bowl O-Ring
- 1 S17737 Nozzle O-Ring
- 1 S13734 Hand Hole Cover O-Ring
- 1 S13531 Steering Tube Bushing
- 1 S09488 Grommet
|
|
On Sale Starting From: $359.99
This Part has options, please click the button below to order.
620-1000 + Option(s) Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only.
|
|
150-2010 Berkeley Droop Snoot Kit
Droop Snoot Kit, includes Berkeley Original Droop Snoot, steering extension and includes gaskets & hardware.
|
|
150-B-06225 Berkeley Hand Hole Cover Kit
This kit comes with all necessary hardware to fasten a
hand hole cover on all original Berkeley jets.
This kit includes:
- 1 Lock Wrench #S11543
- 2 Rod End Bolts #S10907
- 1 O-Ring #S13734
- 2 Flange Nuts #S23680
- 2 Groove Pin #S14479
- 1 Fastener #S14493
- 2 Machine Screw #S25599
|
|
150-B06230 Berkeley Steering Tube Kit
The Berkeley steering tube kit includes everything you need to install your
steering through the transom assembly. Steering tube is 9" long.
Includes:
- 1 Steering Tube
- 1 Steering Tube Grommet
- 2 Steering Tube Nuts
|
|
150-5000 Jet Drive Water Pressure Relief Kit
The kit from Pack-A-Jet will come with a brass pressure relief valve with 1/2" npt bypass outlet and a stainless steel extension tube for easy installation. Direct fit to the Berkeley models 12JC and 12JG with 3/8" NPT water inlet, but can be used on other models as well as long as they have a 3/8"NPT water inlet on the inside of the boat. Will NOT work on 12JE model or similar pumps where the water inlet is on the outside of the boat. In that case you'll want to buy a pressure relief valve only and a simple T fitting to adapt to the existing inlet tube.
The pressure relief valve opens at app. 12 to 15 psi to move excess water overboard.
Optional hose kits are available see related products below.
|
|