150-M-05645 Steering Tiller
Supersedes: 152-J0646
|
|
150-S-16141 Steering Tube for Morse
|
|
150-S13531 Steering Tube Bushing
|
|
150-B06230 Berkeley Steering Tube Kit
The Berkeley steering tube kit includes everything you need to install your
steering through the transom assembly. Steering tube is 9" long.
Includes:
|
|
150-S13530 Steering Tube Nut
Supersedes: 152-J0530
|
|
150-S13532 Steering Tube Seal Nut
This part threads on the end of your Berkeley Jet's Steering Tube. It has a dual O-ring seal inside and a grease zerk for ensuring smooth steering cable operation.
|
|
150-M-05356 Stock Berkeley 17-4 Stainless Steel Impeller Shaft. Can also be used in on American Turbine Pumps in place of #SH1107. Also available machined for inducer impeller
|
|
150-S-19160 1/4" x 11-3/8" Long Stud
|
|
150-S19179 1/4" x 11-3/8" Long Stud
|
|
|
|
|
|
|
|
150-S14380 Stator Bearing Cartridge SD 231 Suction Seal (AT, Berk, Late Dom)
Supersedes: 152-SL1507
|
|
150-S14063 Thrust Bearing (Berk, AT & Dom)
Supersedes: 152-B1007
Thrust Bearing for Berkeley Jet Drive. Install w/Loading Slot Towards Engine
Check out the video tab below for help with installation!
|
|
150-B06226 Berkeley Thrust Bearing Kit (Does not include shaft or sleeve)
This kit includes:
- 1 Thrust Bearing
- 1 Bearing Cap Gasket
- 1 Snap Ring
- 1 Suction Piece Seal
- 1 Bearing Cap Seal
- 1 Bowl Gasket
|
|
|
|
|
150-S16506 Thrust Washer (need one with Aquamet pump shaft)
|
|
|
|
|
150-S15396 Tiller Shaft
Supersedes: 152-J0396
|
|
150-L-04962 "F" Pump Tilt Ring
|
|
150-B-07558 Transom Assembly Bolt Kit
This Berkeley transom assembly bolt kit is comprised of all new stainless
hardware to install your transom assembly.
Includes:
- 8 Flat Head Bolts 2 inches long
- 2 Flat Head Screws
- 8 Washers
- 8 Nuts
|
|
