160-10-1260-19 Bowl Bearing Lip Seal
|
|
|
|
|
160-23-1408-09 Cable Gland Assembly 1/2" NPT
|
|
160-14-0797-01 Cable Lock Nut
|
|
160-22-1995-09 Cable Lock Plug
|
|
160-23-1503-03 Cable Pin Fit Washer
|
|
160-47-0008-07 Cable Pivot Bracket O-ring
|
|
160-08-2195-11 Kit #86 - Nyliner bearing sold each (Qty 2 needed)
|
|
160-23-1504-02 Cable Sealing Gland
|
|
144-12 The 9" tall steering post is beautifully polished.
- 3" base end
- 2-1/2" hub end
- Base Degree Sizes: 0 Degree or 7 Degree
|
|
144-1092 These clamps will replace worn out cable clamps for Calgo steering. Sold Each.
|
|
144-1090 These fitting will replace worn out cable fittings for Calgo steering.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Calgo is High Performance steering system that has no free-play or slack in you nozzle or rudder. The cable is fully enclosed and easy to route. The stainless steel cable has a load rating of 1700 lbs. These kits include helm, 9" steering post, cable thru-hull fittings, billet tiller arm, rod end kit and cables. This kit is designed for Berkeley pumps that use the factory (no-trimmable) steering nozzle.
|
|
144-110 Calgo is High Performance steering system that has no free-play or slack in you nozzle or rudder. The cable is fully enclosed and easy to route. The stainless steel cable has a load rating of 1700 lbs. These kits include helm, 9" steering post, cable thru-hull fittings, custom tiller arm, rod end kit and cables. This kit is designed for Jet Pumps that use the place diverter nozzle and standard bracket.
Will fit Berkeley 12JC/G and American Turbine Dominator Place Diverter Nozzles.
Will NOT fit Berkeley 12JE/F or Jacuzzi Nozzles.
|
|
144-1040 Calgo High Performance steering system that has no free-play or slack in your nozzle or rudder. This replacement helm unit includes trim to fit 1/8" cables, one 19 ft. and one 18 ft., thru-hull fittings and helm.
|
|
144-1060 This is a V-drive Calgo steering system, it has a 9 inch steering shaft and has 3/16" cut to fit cables, 1 cable is 17' the other cable is 20'
|
|
144-1215 If your Calgo Steering Kit is in need or a rebuild, we can help This service includes checking all parts , servicing the helm and replacing the cables. NOTE: This requires you to mail your parts in for service.
For: 1/8" cable systems.
|
|
144-1220 If your Calgo Steering Kit is in need or a rebuild, we can help This service includes checking all parts , servicing the helm and replacing the cables. NOTE: This requires you to mail your parts in for service.
For: 3/16" cable systems.
|
|
144-1085 Replacement tiller arm for stock Berkeley 12JC/G Nozzle. This tiller arm needs to be used with the long tiller shaft, 150-S19212
|
|
465-1169 Clear Sealant, 10 oz. Cartridge
This sealant works great for sealing the transom assembly and around the bowl
to the transom assembly.
|
|
