Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only. Click here for how to measure for replacement steering cable. Throttle and shift cables are measured end to end.

Uflex Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. Click here for how to measure for replacement cable.

This kit includes:

• T71FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Uflex Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included. Click here for how to measure for replacement cable.

This kit includes:

• M86 - pre assembled helm with steering cable
• G86 - shaft assembly
• X34 - 90° bezel (diameter is 5 1/8")

Features and Technical Specifications:

• All stainless steel cable output ends
• Made exclusively in corrosion resistant materials
• Optional 90° or 20° installation
• Standard 3/4”tapered shaft
• Lock-to-lock steering wheel turns: 3,5
• Stroke: 8.2” (210 mm)
• Maximum allowable steering wheel diameter: 16.5” (420 mm)
• Minimum steering cable bend radius: 7,9” (200 mm)
• G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Berkeley Droop Snoot Kit

Droop Snoot Kit, includes Berkeley Original Droop Snoot, steering extension and includes gaskets & hardware.

Wedge Bolt Kit

This bolt kit is used for new droop snoot installations that include a 2 or 4 degree wedge.  The comes with all stainless hardware, nozzle gaskets and everything else you need to do the job right.

Includes:

• 2 Nozzle Gaskets
• 4 1.25" Bolts
• 4 1.50" Bolts
• 4 1.75" Bolts
• 8 Lock Washers

Droop Snoot Bolt Kit

This bolt kit is used for new droop snoot installations with NO wedge.  The comes with all stainless hardware and a nozzle gasket.

Includes:

• 1 Nozzle Gasket
• 8 Bolts, 5/16" x 1.25"
• 8 Split Lock Washers, 5/16"

Droop Snoot Stud Kit

This is an installation kit for a droop snoot with NO Wedge.  Comes complete with all stainless hardware.

Includes:

• 8 Studs
• 8 Nuts
• 8 Lockwashers

Jet Drive Water Pressure Relief Kit

The kit from Pack-A-Jet will come with a brass pressure relief valve with 1/2" npt bypass outlet and a stainless steel extension tube for easy installation. Direct fit to the Berkeley models 12JC and 12JG with 3/8" NPT water inlet, but can be used on other models as well as long as they have a 3/8"NPT water inlet on the inside of the boat. Will NOT work on 12JE model or similar pumps where the water inlet is on the outside of the boat. In that case you'll want to buy a pressure relief valve only and a simple T fitting to adapt to the existing inlet tube.

The pressure relief valve opens at app. 12 to 15 psi to move excess water overboard.
Optional hose kits are available see related products below.

Berkeley "B" Partial Overhaul Kit

To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three `Repair / Parts' Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!

"B" Partial Overhaul Kit includes:

1 L02850 Intake Gasket 1 S14063 Thrust Bearing 1 S14482 Impeller Key 1 S14475 Bearing Cap Seal 1 S14380 Suction Piece Seal 1 S14476 Bowl Seal 1 S14478 Retaining Ring 1 S09017 Bowl Gasket 1 S10870 Nozzle Hsg. Gasket 1 S09018 Bearing Cap Gasket 1 S10068 Insulator 1 S10125 Wear Ring

2 S14483 Bowl Bearings 1 S13531 Steering Tube Bushing 1 S09488 Grommet 4 S08287 Packing Rings 4 S14477 Nyliner Bearing 2 S15414 Nyliner Bearing 1 S13166 Transom Gasket 1 S13731 Bowl O-Ring 1 S17737 Nozzle O-Ring 1 S13734 Hand Hole Cover O-Ring 1 S12005 Impeller Nut 1 S09850 Bowl Bearing Cap

Berkeley "C" Seals & Gaskets Kit

To facilitate easier maintenance of your Berkeley pump, Berkeley Jet Drive has created three `Repair / Parts' Kits Each kit is applicable to all Berkeley Jet Drive Models: 12JB, 12JC, 12JG, 12JE, and 12JF. There are many people attempting to sell non-original replacement kits in an attempt to compete price wise They short sell or remove parts to try and compete with factory pricing Don't be mislead, get all that you pay for, demand authentic Berkeley parts!

"C" Seals & Gaskets Kit Only includes:

• 1 L02850 Intake Gasket
• 1 S14475 Bearing Cap Seal
• 1 S14380 Suction Piece Seal
• 1 S14476 Bowl Seal
  
• 1 S09017 Bowl Gasket
• 1 S10870 Nozzle Hsg. Gasket
• 1 S09018 Bearing Cap Gasket
• 1 S13531 Steering Tube Bushing
• 1 S09488 Grommet
• 4 S08287 Packing Rings
• 1 S13166 Transom Gasket
• 1 S13731 Bowl O-Ring
• 1 S17737 Nozzle O-Ring
• 1 S13734 Hand Hole Cover O-Ring

Berkeley Hand Hole Cover Kit

This kit comes with all necessary hardware to fasten a hand hole cover on all original Berkeley jets.

This kit includes:

• 1 Lock Wrench #S11543
• 2 Rod End Bolts #S10907
• 1 O-Ring #S13734
• 2 Flange Nuts #S23680
• 2 Groove Pin #S14479
• 1 Fastener #S14493
• 2 Machine Screw #S25599