Nyliner Kit For 12JC, 12JG, 12JB Jet Drives

The Berkeley nyliner kit replaces all the nyliners on your factory pump.

Nyliner Kit For 12JE Jet Drives

The Berkeley nyliner kit replaces all the nyliners on your factory pump.

4300BC Bulkhead Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket Even the bulk head versions use an all stainless steel bulkhead and hardware. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38013-000 cables. Used on Berkeley 12JC/G and American Turbine Dominator Jet Drives among others.

Type 43C have 1/4-28 threaded ends. 

3300C / 33C Maxflex Extreme Cable

This is the new evolution of cable design with the very latest in construction technology from the aerospace industry The ultra slippery acetal liner surrounded by a high density HDPE casing that allows the all stainless steel cable to operate smoother, bend tighter, and all with less loss of motion than ever before. High Density Jacket Housing is 0.35" (9mm) Diameter.

• Perfect for long complex cable routing.
• Superior feel and smoothness from its efficiency
• More responsive to tight tolerance applications.
• Commonly used as a throttle cable, trim indicator cable and used on Jacuzzi jet drives 

Type 33C have 10-32 threaded ends

4300C Clamp Style Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38012-000 cables. Used on Berkeley 12JE/F Jet Drives and in some shifter control applications.

Type 43C have 1/4-28 threaded ends.

A-3 Cut Impeller Stainless Steel

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

A Cut Impeller Stainless Steel

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

A-2 Cut Impeller Stainless Steel

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

B Cut Impeller Stainless Steel

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

C Cut Impeller Stainless Steel

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Bowl Bearing for Berkeley Jet Drives. Check out the video tab below for more info on installing this part.