150-S18429 Cable Clamp & Shim
Stainless Steel 4300 C/BC Cable Clamp and shim. Mounting holes are 1" on center.
|
|
151-09370 Heim End 1/4-28, 43C Cable Applications
These rod ends are constructed of high grade stainless steel to withstand theabusive marine environment Never use non-stainless rod ends - they corrode andfail when you least expect it.
|
|
151-09380 33C Cable Heim End - 10-32 Thread
These stainless heim ends are used in severe duty and racing applications.
This
heim end is designed to be threaded on the end of a 33C cable and attach using a 10-32 bolt.
|
|
151-138 33C Cable Heim End - 10/32 x 1/4 Heim End for Jacuzzi
These stainless heim ends are used in severe duty and racing applications.
This heim end is designed to be threaded on the end of a 33C cable and bolt
to a Jacuzzi Jet using a 1/4 bolt.
|
|
620-29140 Brass 43C Cable Attaching Pivot, 1/4" Shaft, 3/8" Shaft Length, 1/4-28 thread
This brass pivot is designed to thread onto your 43C jet boat shift control. Uses a 1/16" cotter pin. (Not Included)
|
|
125-57520 This is the perfect way to seal that diverter control cable.
These beautiful polished billet aluminum cable seals use a 1/2" NPTmale thread toadapt them and a sure fit rubber compression seal for reliability.
|
|
151-17500 Stainless Steel Cable Transom Seal
Stainless Steel Cable Transom Seal, for 43C and 43BC series cables.
|
|
620-29139 1/16" x 3/4" Cotter Pin - Stainless
Bend prongs outward to secure. Also known as split pins, they have one prong slightly longer than the other so they’re easy to open.
Type 316 and 18-8 stainless steel may be mildly magnetic. Type 316 pins are more corrosion resistant than 18-8 stainless steel pins.
|
|
151-192 Rubber Grommet
This is a replacement grommet for 151-17500
|
|